Lower frogmouth sieve for Claas Lexion combines harvester. OEM # 00 0736 061 2. Size 1275x820MM. Part of shoe shaker.

Application A spare part for the thresher of the CLAAS combine.   Destination Participation in separating the grain from the ears while pulling the stalks between the rotating drum and the stationary concave. Sieving the grain into the shaker shoe (grain...

Application of guide roller: The guide roller  or bypass shaft is intended for the direction and a tension of chains of the inclined camera transporter. The bypass shaft structure: The shaft of feader hosing is a long shaft on which some disks with directing...

Application of guide roller: The guide roller  or bypass shaft is intended for the direction and a tension of chains of the inclined camera transporter. The bypass shaft structure: The shaft of feader hosing is a long shaft on which some disks with directing...

Main corn concave for Claas Mega combines harvester. OEM # 00 0663 347 1 . Size - 1570 X 520 MM.  Part of threshing drum.

Wheat pre-concave segment for Claas Mega 202-203-204 combines harvesters. OEM # 00 0663 341 0 . Size - 429 X 335 X 80 MM. Part of threshing drum.

Straw walker for Claas Lexion, Claas Lexion MTS and Claas Lexion Montana combines harvester. OEM # 00 0792 727 0. Length - 4365 MM.

Application of a drum cover plate: The cover plate is intended for protection of a molotilny drum and the drum bottom against grain weight. The cover plate structure: The Lock cover  is a long leaf of metal which is bent on width under certain corners....

Application of reciever plate: The left reciever plate 3D is a component of a frame of the upper sieve with 3D system, and it is established in its back part. The 3D reciever plate structure: The guard is a long leaf of metal bent on width under certain...

Application of reciever plate: The right reciever plate 3D is a component of a frame of the upper sieve with 3D system, and it is established in its back part. The 3D reciever plate structure: The guard is a long leaf of metal bent on width under certain...

Application of end profile: The end profile 3D is a component of a frame of the upper sieve with 3D system, and is established in its forward part. End profile structure: As it works in the conditions of high vibrations, and thickness of metal is insignificant,...

Application of a separation geate: The greate is intended for separation (department) of grain and straw after the thresh on two different flows. The separation geate structure: It consists of the punched leaf of metal which is inserted into a frame bent...