Brand arrow images

Goods arrow images

Show all

Found: 214 товаров
Sort by:

    512253
    AV
    2 721,6 ₴

    Agro Parts

    512253
    512253
    Out of stock
    Plate with fingers 330mm
    2 721,6 ₴
    Spare part for GERINGHOFF
    011310
    AV
    4 959,4 ₴

    Agro Parts

    011310
    011310
    Out of stock
    Plate with fingers
    4 959,4 ₴
    032012
    AV
    872,0 ₴

    Agro Parts

    032012
    032012
    Out of stock
    17 Tooth sprocket 17T with bearing
    872,0 ₴
    Destination of the chain sprocket:The sprocket is an obligatory element of chain drive which serves for torque transfer between two in parallel located shaft by means of a flexible element - a chain. Structure of the sprocket: Sprocket is a profiled wheel...
    032027
    AV
    1 357,0 ₴

    Agro Parts

    032027
    032027
    Out of stock
    10 Tooth sprocket T10/z10
    1 357,0 ₴
    Spare part for GERINGHOFF
    032034
    AV
    800,0 ₴

    Agro Parts

    032034
    032034
    Out of stock
    13 Tooth sprocket 13T/z13, d30mm
    800,0 ₴
    Destination of the chain sprocket: The sprocket is an obligatory element of chain drive which serves for torque transfer between two in parallel located shaft by means of a flexible element - a chain. Structure of the sprocket: Sprocket is a profiled wheel...
    040879
    AV
    102,5 ₴

    Agro Parts

    040879
    040879
    Out of stock
    Geringhoff corn header bolt M12x35
    102,5 ₴
    Features: Special construction of bolt
    041197
    AV
    61,2 ₴

    Agro Parts

    041197
    041197
    Out of stock
    Seal Geringroff, D22mm
    61,2 ₴
    Spare part for GERINGHOFF
    041245
    AV
    249,7 ₴

    Geringhoff

    041245
    041245
    Out of stock
    Thrust ring FKS ASD46 for Geringhoff corn...
    249,7 ₴
    Spare part for GERINGHOFF
    501065
    AV
    118,3 ₴

    Geringhoff

    501065
    501065
    Out of stock
    Slotted bushing set for Geringhoff corn...
    118,3 ₴
    Spare part for GERINGHOFF
    501070
    AV
    451,3 ₴

    Geringhoff

    501070
    501070
    Out of stock
    Support bushing (outer) for Geringhoff...
    451,3 ₴
    Features: Landing on the shaft
    501071
    AV
    456,6 ₴

    Geringhoff

    501071
    501071
    Out of stock
    Axle-shaft for Geringhoff corn header...
    456,6 ₴
    501101
    AV
    3 574,0 ₴

    Agro Parts

    501101
    501101
    Out of stock
    Rotor support with finger
    3 574,0 ₴
    Features: The oil can to lubrication is built

How to choose a corn header for a combine

If you are growing corn, then you need to have the right harvesting equipment. A corn header for a combine is a device that allows you to quickly and efficiently collect corn from the field. An essential piece of equipment for anyone who grows corn. However, before buying, there are several factors to consider in order to choose the right header. In this article we will tell you how to choose a corn header for a combine.

The first and most important factor is the size of the combine. Headers come in a variety of widths, so you need to choose a header that matches the size of your combine. For example, if you have a 3 meter wide harvester, then you should not use a 2.5 meter wide header. In this case, you need a header that will match the width of your combine.

The second factor is the distance between the corn rows. Different headers have different row widths. Therefore, in order to select the right header, you need to know the distance between the corn rows in your field. If you are going to harvest corn with a row spacing of 70 cm, then you need a header with a row spacing of 70 cm.

The third factor is the type of corn. There are different varieties of corn, which can differ in the size of the cobs and the number of rows. Therefore, in order to choose the right header, you need to consider the type of corn you are going to harvest. Some headers can only harvest a certain type of corn.

The fourth factor is the header type. There are two types of harvesters: rotary and drum. Rotary headers have higher productivity, but they are also more expensive. Drum headers are less productive, but they are more reliable and easier to maintain. The choice of type of header depends on how often you will use it and what tasks it should perform.

The fifth factor is header performance. It is determined depending on its width and type. The larger the header, the higher its productivity. However, a large header can be awkward to use, especially if you have a small field. Therefore, in order to choose a header with the desired performance, you need to consider not only its width, but also the size of your field and other factors.

The sixth factor is the availability of additional features. Some headers have additional features that can make them easier to operate. For example, some headers have an automatic cutting height adjustment system, which reduces the time it takes to set up the header before starting work. Also, some headers have the ability to install special nozzles for collecting other crops.

The seventh factor is the budget. Headers can be priced differently, so you need to determine your budget before choosing a header. If you cannot afford an expensive header, then it is better to choose a cheaper one that is suitable for your needs.

The eighth factor is the brand. Some header brands may be more reliable and have a better reputation than others. Therefore, if you want to choose a high quality header, then pay attention to well-known brands.

The ninth factor is the warranty and after-sales service. When choosing a harvester, you need to pay attention to the availability of a guarantee and service. A good harvester should have a guarantee for several years and good service.

The tenth factor is user reviews. Before buying a harvester, it is useful to read the reviews of other users about the harvester you have chosen. This will help you understand its advantages and disadvantages and make a more informed choice.

So, the choice of a corn header for a combine is a responsible and complex process that requires many factors to be taken into account. However, if you consider all these factors and make the right choice, you will get a header that will perform its functions efficiently and simplify your work in the field. On our website there are all kinds of spare parts for the corn header, you can contact our specialists and they will help you make the right choice.