The KÜHNE KTL-7/3 soil cultivator creates a suitable water capacity connection between the cultivated layer and the subsoil by loosening and dusting the soil to the required depth. Its use has a beneficial effect on soil air and water management.

The loosening mounted machine with category 3 three-point suspension. The frame structure of the device is made of special closed sections, welded connectors, can be mounted. The loosening blades and the hydraulically adjustable working unit are connected to the frame structure by a releasable connection. The first cultivator of the machine is the row of loosening blades arranged in two rows, which have a reversible nose insert, a cutting edge and two side lifting wings. The loosening blades are max. They loosen the soil to a depth of 600 mm and are located at a distance of 430 - 500 mm laterally.

Type nameKühne KTL-7/4
Working width3010-3500mm
Transport width4000mm
Working speed6 - 10km/h
Working depth (max.)600mm
Number of loosening knives7db
Distance of loosening knives430-500mm
Mass base machine2000kg
- with spiked cylinder2900kg
Required tractor power155 (210) - 259 (350)kW (LE)

Lineup: Kühne KTL-7/4, Kühne KTL-7/3, Kühne KTL-5/4, Kühne KTL-5 / 2.5

spare parts for Kuhne cultivators

The distance between the knives can be changed steplessly. The knives are protected against overload by securing them with a tension screw. The stretched arrangement of the loosening blades behind each other provides a large flow cross-section, thus reducing the risk of clogging. The loosening blades are located 800 mm apart. The long service life of the knives and wear parts is ensured by the special material quality, innovative production technology and the optimal edge design. The second row of cultivators is the two-row spike working unit, which can be infinitely adjusted with the help of hydraulic cylinders. The task of the spiked rollers is to crush the nuggets, mix the stem residues into the soil to a small extent, partially seal the soil and maintain the working depth. The cultivator is equipped with brackets for placing a protruding light signaling device.

The KTL 7/3 cultivator helps to create the right water capacity connection. The frame structure of the device is made of special closed sections, welded connectors, can be mounted. The distance between the knives can be changed steplessly. The working depth is also adjusted hydraulically as standard.