Application A spare part for the feed elevator of the CLAAS combine. Destination Participation in transporting the grain mass from the header to the threshing drum. This spare part provides the necessary gap between the feed elevator bucket and the guide...
Claas combine harvester chain buckler - 670mm
Country of origin: Germany
Part of inclined chamber CLAAS.
Participation in the transportation of grain from the header to the threshing drum. Provides the optimum clearance between the bottom of the camera and the guide rails.
Prevents excessive blunting of the working surface of the latter during operation.
Used to replace worn or damaged parts in the process of repair and restoration works.
The part is made of plastic in the form of a long strip of rectangular cross section with fastening holes.
Mounted with a threaded connection.
|Dimensions - Height, mm||10|
|Dimensions - Width, mm||70|
|Dimensions - length, mm||680|
|Overall width, mm||60|
|Number of fixing holes||5|
|Dimensions of mounting holes, mm||9х9|
|Distance between holes for attaching, mm||107|
|Distance between holes, mm||170|
|Diameter of the mounting holes, mm||22|