Full area processing. The two-row disc section with aggressive angle of attack geometry ensures perfect chopping with intensive mixing of crop residues over the entire surface to a depth of 3.5–12 cm. The disc section also perfectly distributes the mass of crop residues over the entire working area.
Application A spare part for the header knife of the CLAAS combine. Destination Providing a clean cut of the stalk during operation as a part of the knife, minimizing loss of the grain crops, especially overripe ones. This spare part is used for replacing...
Destination of the chain sprocket:The sprocket is an obligatory element of chain drive which serves for torque transfer between two in parallel located shaft by means of a flexible element - a chain. Structure of the sprocket: Sprocket is a profiled wheel...
![Сегмент ножа жатки комбайна Claas - для рапса [MWS]](https://agrovik.ua/49552-home_default/grain-head-cutter-bar-knife-section-mws.jpg "Сегмент ножа жатки комбайна Claas - для рапса [MWS]")
![Вал карданный 626308.2 жатки Claas, W2200-15, 1480мм [Original]](https://agrovik.ua/34935-home_default/transmission-shaft-pto-6263082-original.jpg "Вал карданный 626308.2 жатки Claas, W2200-15, 1480мм [Original]")
![Звездочка z12 (12 зубов) [Geringhoff]](https://agrovik.ua/49560-home_default/12-tooth-chain-sprocket-12t-geringhoff.jpg "Звездочка z12 (12 зубов) [Geringhoff]")
![Накладка 8x40x725 [Geringhoff]](https://agrovik.ua/49561-home_default/fishplate-8x40x725-geringhoff.jpg "Накладка 8x40x725 [Geringhoff]")
![Кронштейн 753044 жатки комбайна CLAAS [Original]](https://agrovik.ua/49565-home_default/bracket-harvester-reaper-claas-original.jpg "Кронштейн 753044 жатки комбайна CLAAS [Original]")
![Втулка c буртиком 216212 жатки комбайна CLAAS - 20х23/30х16,5 [Original]](https://agrovik.ua/49569-home_default/bushing-with-flange-corn-head-combine-claas-20x23-30x165-original.jpg "Втулка c буртиком 216212 жатки комбайна CLAAS - 20х23/30х16,5 [Original]")
