Product ends
Задний сальник коленвала двигателя Perkins - 158.75х133.35мм
Задний сальник коленвала двигателя Perkins - 158.75х133.35мм

Perkins engine crankshaft rear oil seal - 158.75x133.35m [AVparts]

  • 30/13-4
  • Product code: AV-10158

  Application of oil seal: The oil seal (the popular name in CIS - salnik) serves for consolidation of shaft of rotary details and parts: shaft, yoke, lever, crankshaft, flywheel, gear wheel, transmission, reducer, wooble etc. Thanks to flexible edge from...

от 600,0 ₴
1

В связи с коливанием курса и роста цен, цены уточнять!
Manufacturer:
Задний сальник коленвала двигателя Perkins - 158.75х133.35мм
Рейтинг 5/5 основан на 55 оценках

Perkins engine crankshaft rear oil seal - 158.75x133.35mm [AVparts]


Manufacturer: AVparts
Country of Origin: United Kingdom
The purpose of the reinforced cuff:
Reinforced cuff (popular name - oil seal) is used to seal the shafts of assemblies and rotation details: shaft, rocker arm, crankshaft, flywheel, gear, gearbox, gearbox, etc. Thanks to the elastic edge from the side of the inner hole, which in most cases is tightened spring, reinforced cuff keeps lubricant (solid oil, lithol and other self-lubricating materials) from flowing out of the bearing rotation zone
Gland structure:
Armored cuffs (gland) - a rubber or polyurethane part of a round shape with a hole, consisting of a metal reinforced curved ring and in the vast majority of cases - pond-rings for pressing against the shaft of the inner edge of the cuff. Depending on the shape of the section, there are more than 20 types of reinforced cuffs. However, the most common are only 2 types: TC and SC (single-breasted and double-breasted oil seal). The popular name for a double-breasted cuff is “an omentum with anther”.

Weight, kg0.14
Inner Diameter, mm133.35
Height, mm12.63
Dimensions - Height, mm20
Dimensions - Width, mm170
Dimensions - length, mm170
External diameter, mm158.75

Recently viewed products